Dental Led Contra Angle Handpiece/Contra Angle Dental/Dental Contra Angel Handpiece
Contra Angle Handpieces Product performance
| Chuck | The chuck must be applicable bur corresponding to IOS 1797-2Norms |
| Water and chip air supply | When air pressure is at 200kPa,water flow rate is not less than 50ML/min and air flow rate not less than 1.5L/min |
| Connector of handpiece | The structure, measurement and tolerance of back end of handpiece conform with YY1012 Norm. |
| Sterilization | Handpiece endure sterilization temperature at least 136℃ about 12 minutes once, for 250 times reuse without damage. |
| Temperature test | Under normal working conditions, the connected surface temperature rises less than 22℃ over ambient temperature. |
| Corrosion | There is no corrosion appearance after sterilization cycle. |
| Illumination electricity supply safety | Conforming with GB 9706.1-2007 Norm . |
Contra Angle Handpieces Tech data:
| Air pressure | 245-392kpa |
| Water pressure | 200Kpa |
| Atomized air pressure | 200Kpa |
| water consumption | 50ML/min |
| Rotation speed | 14,000~40,000rpm |
| Bur taking | Push button |
| Bur applicable | CA head Φ2.33~2.35mm FG head Φ1.59~1.60mm |
| Noise | ≤70DB |
DORIT services :
1. The products is warranted for one year from the date of effective delivery(except for artificial damage)
2. Problems caused by the following cases are not include in scope of quality warranty:
a. Non-observance of use and maintenance instruction, tumbles or beats;
b. Improper storing;
c. Action of natural agents and technical assistance carried out by non-authorized personnel.
3. Quality warranty will be stopped under these following cases:
a. Alterations in the product;
b. Use of improper fittings;
c. Technical assistance carried out by Dorit non-authorized person.
4. This warranty is valid in the country where the sales documents were permitted.
FAQ
1. What does your factory mainly produce?
Our factory mainly produces high speed turbine handpiece, low speed handpiece, endodontic Files, led curing light, endo motor as well as some other kinds of dental instruments, which own good features of high precision, high quality and long lifetime.
2. Can you offer OEM service?
Yes, we can offer OEM service. If you need it, welcome to contact me.
3.How can I get some samples promptly?
Please contact us and inform your courier (such as UPS, DHL, Fedex, TNT, EMS and etc.) to collect samples from our office. For samples if their value is less than USD 50.00, we will offer them free of charge. As a courtesy, your express fee and samples charge will be refunded from your 1st order.
4.How can I get the after service? How can I get the spare part after one year warranty?
We welcome your chat online or e-mail to us regarding any technical or related questions that you may have. It’s available to buy some of the spare parts after one year warranty. Please contact with us to confirm!
5.How about the payment terms?
We accept that:
A. For Large order, 50% deposit by T/T after you confirm the order, balance paid by T/T at sight before shipment;
B. For small orders, 100% payment by T/T, Western Union, Paypal or Credit Card before delivery.
6. How long is the warranty?
The bearings have three-month or six-month warranty and the other products have one-year or six-month warranty. Different products have different warranty periods. The warranty is valid in 3 months / 1 year since the date of delivery.
Product Tags:
|
|
Dental Led Contra Angle Handpieces Contra Angle Dental 14,000~40,000rpm Images
|
